Summary JH-DN3416 is a D-node which has built-in CMTS module and CATV optical receiving module and ONU module (optional), those two optical input port connects upwards to CATV fiber and IP trunk fiber and the four high level output RF ports can connect to cable distribution network directly. D-node could finish CATV photovoltaic conversion, IP data photovoltaic conversion and mixture transmission of data and TV signals, actually, it is an "Integrated Service workstation"
JH-DN3416 can completely replace the current optical node equipment which could simplify the HFC network structure. Its excellent transmission capability can meet the NGB requirements completely which enable itself to be the core equipment of triple play projects.
Function CATV Optical Receiver Ethernet fiber transceivers or ONU CMTS: Combine IP data signal and CATV signal in coaxial cable. Realize remote monitoring, configuration & resetting, user management via NMS or Web log in Support QoS, VLAN, L2VPN, PPPoE etc, built-in DHCP/TFTP Server
Advantage of D-node 1) Standard matured technology, avoiding investment risk Due to the standard matured technology, D-node can take full advantage of current transmission network and terminal equipment no matter the IP trunk is Ethernet or EPON, both compatible with. Operators will not be worried about the non-standard EOC technology; This will help to protect original resource and avoid investment risk. 2) Simplified network structure, improved reliability D-node move the mixture point of data and TV signal downward to optical nodes. It simplified the network structure greatly and advantages are as following: Improved reliability. The funnel became smaller because of the user coverage scale narrowed and the total noise would be reduced accordingly which enables the built-in CMTS module working stably in a very clear network environment. Average household bandwidth has been greatly improved With the same bandwidth, the less user, the more bandwidth Easy and convenient for implement and maintenance 3) Lower the network construction investment There is no need for any traditional optical workstation and return path optical receiving equipment, simplified network structure, lower the network construction cost but improved whole system performance. User can choose D-node with power port if wants to keep the original optical receiver and transceiver. 4) Solve the contradiction between CMTS coverage efficiency and funnel noise The traditional DOCSIS solution, due to the high price, is usually deployed in the front room. Wider coverage, higher coverage efficiency, lower cost for each CMTS, but the funnel will be bigger and the noise will be heavier, too. It seems that this is a natural contradiction. This could be solved by all service optical workstation. 5) Advanced Management System Via the NMS, you can operate each D-node intensely in the center room including management for both equipment and end users. Management for equipment: Monitor and control for working status, voltage, power level, temperature and resetting, it can configure and modify working mode and parameters remotely. It has failure warning function. Management for end user: Including user info, authority control, speed limits, billing settings, it can also monitor cable modem running status and parameters, too Warning Function: Including failure warning and running status alarming. Once any abnormal status of voltage, temperature and signal power level occurs or, the CM running RF parameters is on the edge, the package lost probability zooming rapidly; There will be warnings on the NMS interface.
Payment and delivery Items will be shipped within 7 working days after T/T in advance via ups dhl fedex or ems etc.
Warranty 1 year for hardware reparing, 5 years for software updating.